Our Blog

prefilter are used to remove gaseous pollutant , odours and particulates.prefilter remove the bad odour . In sevral cases these problem og bad odour is not so easy . it is timely and cost effective too.

Cyclone type dust collectors are mostly used where the size of dust is very heavy. They provide high efficiency and maximum clean working environment.

A Dust collector is a system mainly uses to clean dust and impurities from air and gases. The dust collector has several applications in industries and also use for commercial purposes.

A nozzle is a projecting pipe or device through which flow is discharge. The sand Blasting nozzle has a very different range in shapes, sizes, and in pressure bearing capacity. It can resist different ranges of pressures without getting broken.

In the Arc spray gun supplier system, the natural material within the sort of metallic wires is melted by means of an electric arc. The heated material is atomized by compressed air and launched towards the workpiece and elements.

Flame spraying techniques are coating processes during which melted (or heated) materials are sprayed onto a surface. The feedstock material is heated by electrical (plasma or arc) or chemical means (combustion flame). Flame spraying can provide heavy layers over an oversized area at a high deposition rate as compared to other processes like electroplating, physical, and chemical vapor deposition.

Wire flame spray is a process in which the feedstock is in wire or rod form. It consists of a nozzle during which, probably acetylene or hydrogen, was mixed with oxygen and burned at the nozzle's face. In wire flame spray a stream of compressed air surrounding the flame atomized and propelled the liquefied metal. Wire flame spray process continuation trusted feeding the wire at a controllable rate so it melted and was propelled during a continuous stream.

The powder Flame Spray Process is essentially the spray of molten metal like zinc, copper, aluminum on the surface for providing a coating. If Zinc is sprayed then called the Zinc spray gun, Copper is Spraying then its Copper spray gun, Aluminum is spraying then it'll be Aluminum spray gun. The molten material is often wire form and powder form depend upon the application.

In metalizing gun, metalized coatings are used to repair worn parts, salvage mismatched components, or provide special properties to the surface of original equipment. Metalizing gun supplier is used for improving bearing strength, adding corrosion or heat resistance, hard-facing, increasing lubricity, improving thermal and electrical conductivity, and producing decorative coatings.