Tungsten Carbide Nozzle
- Tungsten carbide nozzles are widely used in surface treatment, sandblasting, electronics, chemical processes, and other sectors for a variety of purposes such as wire guides and other aspects.
- Tungsten carbide nozzles are more cost-effective and last longer.
- The tungsten carbide nozzle is strong, corrosion-resistant, and abrasion-resistant.
|Payment Mode||Cash, Cheque, DD, Credit Card, 100% T/T, NEFT, RTGS, UPI, IMPS|
|Shipment Mode||By Air, By Road, By Cargo|
|Delivery Time||1-2 weeks from the date of confirmation of Purchase Order and Advance.|
Tungsten carbide nozzle is available in different sizes according to the requirement. In the sand blasting machine, compressed air is used. Compressed air is mixed with blasting media and forms a jet of high velocity with pressure for surface preparation.
Tungsten Carbide Sandblasting Nozzle
A tungsten carbide sandblasting nozzle is a venturi type of nozzle used in sand blasting machine and portable shot blasting machine. In the sand blasting nozzle, a large inlet diameter is tapered into the orifice diameter and then flaring out at the outlet end.
Nozzles are one of the most important parts of a sand blasting machine and an appropriate or inappropriate blast nozzle affects the rate of production. In blasting nozzle taper and length of both the inlet and outlet, the surface affects the pattern and velocity of the abrasive blast media exiting the nozzle. When choosing the correct size nozzle needs to consider a few things with the nozzle. Tungsten Carbide Nozzle comes in different sizes and nozzle size requirement is determined by the amount of available air in cfm, the capacity of the blast machine, and the size of the blast hose used. Sand Blasting nozzles consist of a converging entry and a diverging exit. This type of exit and entry blasting nozzle produces an effect that greatly accelerates the airflow and particles.
Tungsten carbide sand blasting nozzles are available in different sizes according to the requirement. In the sand blasting machine, compressed air is used. Compressed air is mixed with blasting media and forms a jet of high velocity with pressure for surface preparation.
Tungsten Carbide Nozzle
|Air Consumption||12-120 cfm|
Advantages of Tungsten Carbide Nozzle
- Longer service life.
- High hardness.
- High wear-resistance ability.
- Lower cost per use.
- Reducing downtime.
Sand blasting machines are used for surface preparation, removal of rust, and old paint, and removal of containments from the surface. To perform this operation different types of blasting media are used. Blasting media use in this process is available in varieties of sizes and media types. steel grit, steel shot, aluminum oxide, copper slag, and glass beads are used. Blasting media use depends upon the purpose of the blasting process and component material. To form the blasting process a portable blasting machine nozzle is used. Nozzle form a jet of blasting media and compressed air on the component surface where blasting is needed. When blasting media is chosen for the process blasting nozzle size is also an important factor. Because the size of the media is large and the nozzle size is small then the media stuck inside the nozzle which causes blocking of the nozzle and the process is not done.
Different nozzle size gives different cleaning rate. The size of the nozzle depends upon the availability of compressed air. If the requirement of cleaning rate is more, then the large size of the nozzle is used. For the large size of the nozzle, the compressed air requirement is also high for proper working output. If compressed air of low cfm is available then a small-size nozzle is used.
Tungsten Carbide Blast Nozzle in India
Tungsten Carbide Blast Nozzle in India at a low price. we are the leading Manufacturer & Supplier of Boron Carbide Nozzle, Tungsten Carbide Sandblasting Nozzle, sand blasting cabinets, sand blasting machines, portable shot blasting machine, abrasive grit blasting machine, sand blasting room, bench top sand blasting cabinet, remote control valves, tumblast shot blasting machine, pipe cleaning blasting machine, sand blasting equipment, shot peening machine, stone shot blasting machine, thermal spray guns, hvof gun, flame spray gun, thermal spray wire and powder, abrasive media, glass beads, copper slag, stainless steel shot, cut wire shot, ps ball, steel grit, steel shot, etc.
Garnet sand may be a good abrasive, and a standard replacement for silica sand in <strong>sand blasting</strong>. The garnet, because it is mined and picked up, is crushed to finer grains; all pieces which are larger than 60 mesh (250 micrometers) are normally used for sand blasting.
Steel shot is harder than lead and features a lower density. To catch up on this you ought to move up 1 or 2 shot sizes and initially shoot birds at closer range – don't alter your shooting technique. As steel shot is harder than lead it is often driven faster without deforming the pellets - keeping tighter patterns.
Steel Grit is offered in a form of shapes and sizes which will admit administering a variety of blast profiles for obtaining different results. This sort of grit is angular in nature the way it's been created. This grit is good for helping to get rid of the contaminants from the surface of varied products and it also creates a final profile for the new coating to stick to.
Copper slag may be a by-product obtained during smelting and refining of copper. The waste copper slag is often used as abrasive tools, construction, and ballast.
The main use of aluminum oxide is in refractories, ceramics, polishing, and abrasive purposes. Large contents of aluminum hydroxide, from which alumina comes, is used in the production of zeolites, coating titania pigments, and as a fireplace retardant/smoke suppressant.