Cut Wire Shot

Cut Wire Shots

Cut Wire Shots is made of the cold drawn spring steel wire with a high content of carbon (C) and is obtained by cutting wire into lengths equal to the wire diameter, and then making it round if needed through the conditioning (rounding) process. The quality is secured in the cut wire shot because the wire from which it has been given is heat-treated and cold-drawn to produce hardness and identity. This, together with the stable chemical features and complete solidity of every piece, ensure that the cut wire shot will not fracture, break or powder while in use. Cut Wire Shot manufacturer is the media of inclination for peening, cleaning, tumbling, and vibratory wrapping up. It is broadly utilized in wheel impact hardware. It very well may be of two shapes as-cut (barrel-shaped with sharp edges) or molded (adjusted to a circle). Cut wire shot is impacting media utilized in shot shooting machine for the surface readiness measure.

Cut Wire Shots Manufacturer

Cut wire shot manufacturer has a sharp edge because of this cut wire shot are utilized for acceptable cleaning where the speed of cleaning is basic and harsh completing is worthy. Cut wire shot manufacturer use in shot blasting machine in which wheel pivots and the shot blasting machine measure is shaped toss cut wire on the outside of the part. To turn the wheel electric engine is utilized. In an airless blasting machine size of the wheel differs and with the wheel size, bureau size fluctuates too. The size of the lodge relies on the part measurements. Cut wire shots not delivered dust during the blasting interaction and can be reused ordinarily. 

Cut wire shot accessible in different hardness ranges relies on the application. Typically higher the hardness of cut wire shot lower the sturdiness. Surface cleaned by cut wire shot manufacturer shows astoundingly more brilliant and smooth outcomes in the wake of blasting.

Features of Cut Wire Shot

• Its cylindrical shape with edges rounded helps to clean faster. The rate of cleaning will be ultimately increased by at least 25% of your Blasting Machine.
• Equal hardness and size and excellent homogeneity.
• After a few hours of usage, during the shot blasting process, the cut wire shot becomes conditioned (spherical) due to its natural tendency.
• Due to fine grain size, shots live for days and weeks, until every shot reduces to microparticle; they do not break into dust.
• The shot used in the shot peening machine / blasting process should be at least as hard as Almen strips or the part being peened/blasted.
• Being used in more cycles (3-5 times), the cut wire shot manufacturer reduces the cost for maintenance and warehouse.
• Lower Surface Contamination.
• 100% solid material; no blowholes, tails & porosity.
• You can reduce the time for shot peening/blasting.
• Cleans fast and gives a bright & smooth finish than other abrasives.
• Increases the fatigue life for the blasted objects.
• No dust or health hazards during the operation.

Cut Wire Shot Industrial Uses

• Automotive Industry.
• Aerospace Industry.
• Medical Industry.
• Shipping Industry.

Cut Wire Shots Manufacturer in India

We provide steel shot, SS shot, copper slag, steel grit, garnet sand, quartz shot, aluminum oxide, glass beads, etc. We provide a large range of products and are checked on various parameters, such as density, physical and chemical properties, microstructure, hardness, and durability. We are focused on our quality products and customer satisfaction.